What you need:
* A Windows 2000/XP
installation which is totally clean from
any other Nokia product. That’s no
cable drivers, no applications, no
nothing. Not even any entries in your
registry. (Nokia made a registry
cleaning tool, find it here. I don’t know
how effective it is, I clean manually by
searching the registry and deleting all
keys related to Nokia.)
* Nokia Diego v3.07 SP2
(Nokia Diego 3.07 Sp2.msi)
* Nokia Phoenix 2006
(phoenix_service_sw_2006_34_2_156.exe)
* Installation time dongle crack
(Nokia_Phoenix_Iinstallation_time_dongle_crack.exe)
* Runtime dongle crack (Nokia
Phoenix 2006 - Run-time dongle-
crack.exe)
Please be aware of that MyShareFile
deletes all uploads after 30 days of
inactivity. These files were uploaded on
October 20, 2006)
You will also need:
* To understand written English
* To read these instructions
carefully, and not rush ahead!
Now, with that said, let’s do this step
by step…
1. Uninstall everything related to
Nokia from your computer.
2. Clean out all Nokia related
entries in your registry.
3. Reboot your computer, do not run
anything, you would like to have a clean
environmant.
4. Unpack the zip files you
downloaded above. Do not unpack the
executable rar files!
5. Install Nokia Diego, that’s done
by double-clicking the file Nokia
Diego 3.07 Sp2.msi. There’s nothing
special about this installation, just run
the msi file and answer the dialog
boxes. Do not change any paths or
anything else, just make a default
installation. Do NOT run the
application after installation! It will
complain about not finding any dongle,
we’ll fix that later… In fact, you will
most likely never, ever start Diego by
itself anyway..
Now on with the tricky part….
6. We will now install Phoenix, and
this takes some tricks and you need to
be a bit careful about what you’re doing,
otherwise you won’t succeed.
1. Start the Phoenix
installation by double-clicking the
phoenix_service_sw_2006_34_2_156.exe
file.
2. After a moment, you should
be greeted by this screen:
Just click the “Next” button
to go on.
3. The application will now
start installing…
4. After a while you will get
an error dialog box telling you that
installation cannot continue without a
dongle. Of course you don’t have one
since you’re reading this..
Do not click any of the
buttons in that dialog yet!
5. Now, start the installation-
time dongle crack by double-clicking
the file Nokia Phoenix - Iinstallation-
time dongle crack.exe.
Just start it, do not click
that “Install” button yet! Your screen
should now look like this:
Here comes the part that needs some
special attention. To explain it; the
crack consists of a couple off dll files
that makes Phoenix believe that there
is a dongle attached.
The installer has the original files
locked at this point, so they cannot be
replaced. This is what makes this step
a little tricky.
When the “Try again” button in the
installer is clicked, the files are
released, and can be replaced before the
dongle test is made again.
Here’s how it must be done:
1. Check the crack installer window
so that the “Destination folder” really
points to your Windows’ System32
directory. If it doesn’t, edit the line in
the window. (If you don’t know what and
where that is, you should definately not
even try to install this piece of software
since you won’t have the competence to
use it anyway.)
2. Arrange the Phoenix installer
window and the crack installer window
so you can have very quick access to
both of them.
3. Click the Phoenix installer’s
“Try again” button.
4. Within 1-2 seconds, click the
crack installer’s “Install” button. The
installation should continue, like this;
5. Sit back and laugh at Nokia’s
installation protection.
6. If the installation did not
continue, and you get the “Dongle not
found” dialog box popping up again,
then you were not quick enough in step
6.e.iii and iv, or you didn’t get the
“Destination folder” right.. So, you
will have to go back to step 6.e.
# At some point, the installer
component root.exe would like to use
your network connection. I haven’t seen
any problems with that, and frankly I
don’t know what it really wants to
check. Anyway, if you have your
Windows Firewall active, this will pop
up (but in your language);
I just allowed it, I haven’t even tried
denying it to see if it makes any
difference.
# When the installation finish the first
step, you’ll be asked if you want to
reboot now or later;
# You must reboot at this point, do not
wait, and do absolutely not try to start
any of the Nokia applications!
The installation continues after reboot.
# After the reboot, all the Phoenix
DLL files will be registered with your
system before your normal desktop
comes up, it take a little while.
# During the DLL registration, the
installer will complain twice that it
can’t find the DESkey (that’s the
dongle code), looks like this;
Just click “OK” in these two boxes,
and everything will be fine..
# When this is ready, your normal
desktop should show up. Do not try to
start Phoenix yet!
# Now it’s time to install the Phoenix
run-time crack, this must be done to be
able to start the application. Double-
click the Nokia Phoenix 2006 -
Run-time dongle-crack.exe file. It
should look like this;
Check that the “Destination folder” is
pointing to the correct location, if not,
correct the path. Then press the
“Install” button.
# Installation done!
# Double-click the Phoenix icon on
your desktop to start the application.
# You should now be presented with a
login box, like this;
Press “Maintain” to add a user.
# In the new box popping up, enter a
user name, any name, and initials. In
this example, I entered “Steve” with
the initials “SN”;
Click “OK”.
# You’re done. Enjoy…
Download http://www.sendspace.com/file/vhjxp2
Untuk lebih lengkap cek http://www.wahanaponsel.com/articles/repair_nokia/software-phoenix-reparasi-ponsel-cdma-dan-gsm-bb5.html
No comments:
Post a Comment